Flame Proof 40 Amps Two way Lever Type Shunt Limit Switch – Gas Groups 2C
Flame Proof 40 Amps Two way Lever Type Shunt Limit Switch is used to trip motor supply when the moving loads reach the extreme end positions of the working zone. These are suitable for use in explosive gases, as specified Gas groups 2C, as per IS/IEC 60079-0-2007 & IS/IEC60079-1-2007. Limit Switch with 2 NC Contact. Contacts rated for 40 Amps at 500 V.A.C.
Flame Proof 40 Amps Two way Lever Type Shunt Limit Switch, two Contact elements are operated by respective rotating cams, suitably adjusted on a camshaft. Which rotates with the fixed speed ratio of the drive motor shaft. The cams can step Lessly positioned so that they trip motor supply and stop the motion at the set point of travel. The Lever Limit Switch with IP-54 degree of protection is available in desired NO/NC contacts.